tlp180 2009-01-19 1 toshiba photocoupler gaas ired & photo ? tr ansistor tlp180 telephone use equipment programmable controllers ac / dc ? input module telecommunication the toshiba mini flat coupler tlp180 is a small outline coupler, suitable for surface mount assembly. tlp180 consist of a photo transistor, optically coupled to a gallium arsenide infrared emitting diode connected inverse parallel, and can operate directly by ac input current. ? collector-emitter voltage: 80 v (min) ? current transfer ratio: 50% (min) rank gb: 100% (min) ? isolation voltage: 3750 vrms (min) ? ul recognized: ul1577, file no. e67349 ? bsi approved: bs en60065:2002, certificate no.8285 bs en60950-1:2002, certificate no.8286 current transfer ratio current transfer ratio i f = 5 ma, v ce = 5 v, ta = 25 classi- fication(*1) min max marking of classification standard 50 600 blank, ye, gr, bl , gb rank y 50 150 ye rank gr 100 300 gr rank bl 200 600 bl rank gb 100 600 gb the product with the rank y and bl are limited in production. for details, please contact your nearest toshiba sales representative. (*1): ex. rank gb: tlp180 (gb) (note) application type name for certification test, please use standard product type name, i.e. tlp180(gb): tlp180 toshiba 11 ? 4c1 weight: 0.09 g (typ.) pin configuration (top view) 6 1: anode, cathode 3: cathode, anode 4: emitter 6: collector 4 1 3 unit in mm
tlp180 2009-01-19 2 absolute maximum ratings (ta = 25c) characteristic symbol rating unit forward current i f(rms) 50 ma forward current detating (ta 53c) i f / c ?0.7 ma / c pulse forward current (note 1) i fp 1 a led junction temperature t j 125 c collector ? emitter voltage v ceo 80 v emitter ?collector voltage v eco 7 v collector current i c 50 ma power dissipation p c 150 mw power dissipation derating (ta 25c) p c / c ?1.5 mw / c detector junction temperature t j 125 c storage temperature range t stg ?55 to 125 c operating temperature range t opr ?55 to 100 c lead soldering temperature (10 s) t sol 260 c total package power dissipation p t 200 mw total package power dissipation derating (ta 25c) p t / c ?2.0 mw / c isolation voltage (ac,1 min., r.h. 60%) (note 2) bv s 3750 vrms note: using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operat ing temperature/current/voltage, etc. ) are within the absolute maximum ratings. please design the appropriate reliability upon reviewing the toshiba semiconductor reliability handbook (?handling precautions?/?derating concept and methods?) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). note 1: pulse width 100 s,f=100 hz note 2: device considered a two terminal device: pins 1 and 3 shorted together an d 4 and 6 shorted together. recommended operating conditions characteristic symbol min typ. max unit supply voltage v cc D 5 48 v forward current i f(rms) D 16 20 ma collector current ic D 1 10 ma operating temperature t opr ?25 D 85 c note: recommended operating conditions are given as a design guideline to obtain expected performance of the device. additionally, each item is an independent guide line respectively. in developing designs using this product, please confirm specified characteristics shown in this document.
tlp180 2009-01-19 3 electrical characteristics (ta = 25c) characteristic symbol test condition min typ. max unit forward voltage v f i f = 10 ma 1.0 1.15 1.3 v led capacitance c t v = 0, f = 1 mhz D 60 D pf collector ?emitter breakdown voltage v (br) ceo i c = 0.5 ma 80 D D v emitter ? collector breakdown voltage v (br) eco i e = 0.1 ma 7 D D v v ce = 48 v (ambient light below 1000 ? x) (note 3) D 0.01 (2) 0.1 (10) a collector dark current i ceo v ce = 48 v (ambient light ta = 85c below 1000 ? x) (note 3) D 2 (4) 50 (50) a detector capacitance (collector to emitter) c ce v = 0, f = 1 mhz D 10 D pf note 3: please use standard electric lamp to light up the device's marking surface. coupled electrical characteristics (ta = 25c) characteristic symbol test condition min typ. max unit i f = 5 ma, v ce = 5 v 50 ? 600 current transfer ratio i c / i f rank gb 100 ? 600 % if = 1 ma, v ce = 0.4 v ? 60 ? saturated ctr i c / i f (sat) rank gb 30 ? ? % i c = 2.4 ma, i f = 8 ma ? ? 0.4 i c = 0.2 ma, i f = 1 ma ? 0.2 ? collector ?emitter saturation voltage v ce (sat) rank gb ? ? 0.4 v off ?state collector current i c(off) v f = 0.7 v, v ce = 48 v ? 1 10 a ctr symmetry i c (ratio) i c (i f = ? 5 ma) / i c (i f = 5 ma) (note 4) 0.33 1 3 ? note 4: i c (ratio)= 5v) ce v, f1 i f (i c1 i 5v) ce v, f2 i f (i c2 i = = = = i c1 i c2 v ce i f1 i f2
tlp180 2009-01-19 4 isolation characteristics (ta = 25c) characteristic symbol test condition min typ. max unit capacitance input to output c s v s = 0 v, f = 1 mhz D 0.8 D pf isolation resistance r s v s = 500 v, r.h. 60% 510 10 10 14 D ac, 1 minute 3750 D D ac, 1 second, in oil D 10000 D v rms isolation voltage bv s dc, 1 minute, in oil D 10000 D v dc switching characteristics (ta = 25c) characteristic symbol test condition min typ. max unit rise time t r D 2 D fall time t f D 3 D turn ? on time t on D 3 D turn ? off time t off v cc = 10 v, i c = 2 ma r l = 100 D 3 D s turn ? on time t on D 2 D storage time t s D 25 D turn ? off time t off r l = 1.9 k (fig.1) v cc = 5 v, i f = 16 ma D 40 D s fig. 1: switching time test circuit t off t on v ce i f t s v cc 4.5v 0.5v v cc r l i f v ce
tlp180 2009-01-19 5 p c ? ta 200 ? 20 0 20 40 60 80 100 120 160 120 80 40 0 allowable collector power dissipation p c (mw) ambient temperature ta (c) i fp ? d r duty cycle ratio d r pulse forward current i fp (ma) 3000 10 pulse width 100 s ta = 25c 10 ? 3 10 ? 2 10 ? 1 10 0 30 50 100 300 1000 500 v f / ta ? i f forward current i f (ma) forward voltage temperature coefficient v f / ta ( m v / c ) ? 3.2 ? 0.4 0.1 ? 2.8 ? 2.4 ? 2.0 ? 1.6 ? 1.2 ? 0.8 0.3 0.5 1 3 5 10 30 50 i fp ? v fp pulse forward voltage v fp (v) 1000 1 0.6 500 300 100 50 30 10 5 3 1.0 1.4 1.8 2.2 2.6 3.0 pulse width 10 s repetitive frequency = 100 hz ta = 25c pulse forward current i fp (ma) i f ? ta ambient temperature ta (c) allowable forward current i f (ma) 100 ? 20 80 60 40 20 0 0 20 40 60 80 100 120 i f ? v f forward voltage v f (v) forward current i f (ma) 100 0.001 0 10 1 0.1 0.01 0.4 0.8 1.2 1.6 2 ? 25c 85c 25 c
tlp180 2009-01-19 6 collector current i c (ma) i c ? v ce 50 0 collector-emitter voltage v ce (v) 0 40 30 20 10 2 4 6 8 10 50 ma 30 ma 2 0 ma 1 5 ma 10 ma p c (max) i f = 5 ma ta = 25c collector-emitter voltage v ce (v) forward current i f (ma) i c / i f ? i f current transfer ratio i c / i f (%) 1000 10 0.1 0.3 0.5 1 3 5 10 30 50 30 50 100 300 500 v ce = 10 v v ce = 5 v v ce = 0.4 v ta = 25c sample b sample a collector dark current i d(i ceo ) ( a) i ceo ? ta ambient temperature ta (c) 0 10 1 v ce = 48v 5 v 1 0 v 24 v 20 40 60 80 100 10 0 10 ? 1 10 ? 2 10 ? 3 10 ? 4 i c ? i f forward current i f (ma) collector current i c (ma) 0.1 0.1 0.3 0.5 1 3 5 10 30 50 100 0.3 0.5 1 3 5 10 30 50 sample a sample b ta = 25c v ce = 10 v v ce = 5 v v ce = 0.4 v i c ? v ce 30 0 0 1.0 0.2 0.4 0.6 0.8 20 10 collector current i c (ma) 50 ma ta = 25c 4 0 ma 30 ma 2 0 ma 10 ma 5 ma 2 ma
tlp180 2009-01-19 7 v ce(sat) ? ta ambient temperature ta (c) collector-emitter saturation voltage v ce(sat) (v) 0.24 0 ? 40 0.20 0.12 0.08 0.04 ? 20 0 40 80 100 20 60 0.16 i f = 5 ma, i c = 1 ma i f = 1 ma, i c = 0.2ma i f = 1 ma i c = 0.2 ma i c ? ta collector current ic (ma) 100 1 ? 20 100 0 20 40 80 30 5 60 0.1 0.3 0.5 3 10 50 v ce = 5 v 1ma 0.5ma 5 ma 1 0 ma i f = 25ma ambient temperature ta (c) switching time ? r l load resistance r l (k ? ) 1 10 30 50 100 300 500 1000 3 5 30 50 switching time ( s) 5 3 1 ta = 25c i f = 16 ma v cc = 5 v t off t s t on 100 10 switching time ( s) switching time ? ta 0 160 ? 20 20 40 60 80 ambient temperature ta (c) 30 10 1 0.5 0.1 100 0.3 3 5 50 t off t s t on i f = 16 ma v cc = 5 v rl = 1.9 k
tlp180 2009-01-19 8 restrictions on product use ? toshiba corporation, and its subsidiaries and affiliates (collect ively ?toshiba?), reserve the right to make changes to the in formation in this document, and related hardware, software an d systems (collectively ?product?) without notice. ? this document and any information herein may not be reproduced without prior written permission from toshiba. even with toshiba?s written permission, reproduction is permissible only if reproducti on is without alteration/omission. ? though toshiba works continually to improve product?s quality and reliability, product can malfunction or fail. customers are responsible for complying with safety standards and for providi ng adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunc tion or failure of product could cause loss of human life, b odily injury or damage to property, including data loss or corruption. before creating and producing designs and using, customers mus t also refer to and comply with (a) the latest versions of all re levant toshiba information, including without limitation, this d ocument, the specifications, the data sheets and application notes for produc t and the precautions and conditions set forth in the ?tosh iba semiconductor reliability handbook? and (b) the instructions for the application that product will be used with or for. custome rs are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining th e appropriateness of the use of this product in such design or applications; (b) evaluat ing and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operat ing parameters for such designs and applications. toshiba assumes no liability for customers? product design or applications. ? product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measur ing equipment, industrial robots and home electr onics appliances) or for specific applicatio ns as expressly stated in this document . product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality a nd/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or se rious public impact (?unintended use?). unintended use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for au tomobiles, trains, ships and other transportation, traffic s ignaling equipment, equipment used to control combusti ons or explosions, safety devices, elevators and escala tors, devices related to el ectric power, and equipment used in finance-relat ed fields. do not use product for unintended use unless specifically permitted in thi s document. ? do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy product, whether in whole or in part. ? product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. ? the information contained herein is presented only as guidance for product use. no re sponsibility is assumed by toshiba for an y infringement of patents or any other intellectual property rights of third parties that may result from the use of product. no license to any intellectual property right is granted by this documen t, whether express or implied, by estoppel or otherwise. ? absent a written signed agreement, except as provid ed in the relevant terms and conditions of sale for product, and to the maximum extent allowable by law, toshiba (1) assumes no liability whatsoever, including without limitation, indirect, co nsequential, special, or incidental damages or loss, including without limitation, loss of profit s, loss of opportunities, business interruption and loss of data, and (2) disclaims any and all express or implied warranties and conditions related to sale, use of product, or information, including warranties or conditions of merchantability, fitness for a particular purpose, accuracy of information, or noninfringement. ? gaas (gallium arsenide) is used in product. ga as is harmful to humans if consumed or absorbed, whether in the form of dust or vapor. handle with care and do not break, cut, crush, grind, dissolve chemically or otherw ise expose gaas in product. ? do not use or otherwise make available product or related soft ware or technology for any milit ary purposes, including without limitation, for the design, development, use, stockpiling or manufa cturing of nuclear, chemical, or biological weapons or missi le technology products (mass destruction weapons). product and related software and technology may be controlled under the japanese foreign exchange and foreign trade law and the u.s. export administration regulations. export and re-export of product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. ? please contact your toshiba sales representative for details as to environmental matters such as the rohs compatibility of pro duct. please use product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled subs tances, including without limitation, the eu rohs directive. toshiba assu mes no liability for damages or losses occurring as a result o f noncompliance with applicable laws and regulations.
|
